This crane belongs to light duty crane, can be used with single or double speed lifting hoist. If the workshop clearance height is limited, the top running type overhead crane is recommended to save the above clearance space and below lifting height.
Working temperature: -25℃ ~ +40℃
Lifting capacity: 0.25-20ton
Span length: 7.5-32mtrsLifting height: 6-30mtrs
Working duty: Class A3
Power: AC 3Ph 380V 50Hz or according to client's requirement
Control mode: Cabin control/remote control/control panel with pendant line
Weight overload protective device
Top quality polyurethane buffer
Crane traveling limit switch and lifting limit switch
Low voltage protection function
Emergency stop system
Laser anti-collision system
Advantage:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Protective earthing
8. Crane switch and travel end switch
9. Sub-assemblies characteristic are tested before assemly.
10.All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.
| Item | Single Girder Overhead Crane |
| Model | LD |
| Span | 7.5m~28.5m |
| Lifting Height | 6m~30m |
| Max. Lifting Load | 20 tons |
| Rated Lifting Moment | 400KN |
| Rated Loading Capacity | 1t~20t |
| Working Grade | A3/A4 |
| Power Source | 380V 50HZ 3phase |
| Working Temperature | -25ºC~+40ºC |
| Color | Customized |
| Application | Metallurgy, power generation, machinery, mining, port, petrochemical |
| Certification | ISO, CE, SGS |
| OEM & ODM | Accepted |
