Single Girder Hoist

Wire rope hoists motor:

Hoists motor is a taper type rotor motor with braking, it has bigger torque, so it canbe adapted to moving frequently, the Maximum torque is 2.43times than the rated torque.

Wire rope hoists gear box: 

Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-frictionoperation.

Wire rope: 

Hoisting rope complies with the exporting standards. The leading rope taken by the Drum does not lip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Wire rope hoists rope drum: 

Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearing for ensuring smooth running.

Wire rope hoists hook: 

The hook block is tested to 150% of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing. The pulley is thickened and dilated than domestic common pulley.

Remote control or pendant control with 36V control circuit.

Magnetic reversing contactors, both mechanically and electrically interlocked.

Forged heat-treated gravity type hook with upper travel limit switch.

Class F or B insulation motor with both running and over current protection.

Multiple disc brake.

All gears are machine cut, case-hardened alloy steel with shock-resistant ductile cores.

Characteristic:

It is equiped with compact structure, convenient adjustment, small volumn, light weight, heavy gravity, easy operation etc.

Please kindly tell us your detailed requirement and the working conditions, we can help you to choose the suitable model as your requirement.
1. Lifting capacity
2. Lifting height
3. Work duty
5. Power supply
6. Other requirements.
Welcome your enquire for details!